FeltersWax – Black

FeltersWax is an original blend created by the UK manufacturer Mum’s Makery.
If you would like to compare with the original manufacturer, you can visit their website here:https://www.mumsmakery.co.uk/

When claws, noses, and other wool-crafted parts are dipped and gently kneaded with this wax, it gives them a distinctive soft sheen with a slightly moist finish.

Available in three colors: white, black, and pink.
This product is the black wax.

Made from natural ingredients and contains lanolin (a potential allergen).

<Examples of Use>
White wax: claws, noses  
Black wax: claws, noses  
Pink wax: tongues, noses  

<How to Use>

• When dipping
After dipping into melted wax, wait about one minute until it cools enough to touch, then knead thoroughly.
Shape with your fingers or a spatula just before it fully hardens.
If necessary, lightly sand with approximately #320 sandpaper, then polish with copy paper to achieve a natural sheen.
If the surface turns white or becomes uneven during the kneading process, apply heat with a hair dryer to help the wax absorb evenly and continue kneading. If fibers rise, dip again into the wax.

• When applying directly to the piece
Apply to the surface using a spatula, allow it to cool until touchable, then gently press.
Heat with a hair dryer to help absorption, reapply the wax, and repeat 2–3 times until the surface no longer turns white and the wax absorbs evenly.
If necessary, lightly sand with approximately #320 sandpaper, then polish with copy paper to achieve a sheen.

<Precautions>
This product must be melted before use and requires proper care.
Store out of reach of children and animals.

Ingredients
• Beeswax
• Resin
• Lanolin
• Beeswax pigment

• Melting point: 62°C and above
• Do not exceed 88°C
• Flash point of beeswax: 204.4°C

Warnings
• The wax becomes hot when melted.
• Work in a well-ventilated area.
• The use of a wax melter is recommended.
• Do not leave unattended while melting.
• Use at your own risk.

※Due to the manufacturing process, very small particles may occasionally be present.  
If you melt the wax and remove them, the product can be used without any problems.

In addition, slight color variations may occur depending on the individual piece, but this does not affect the quality.