Dog Nose Pink (Short Nose Type)
Dog Nose Pink (Short Nose Type)
Couldn't load pickup availability
🚚 Ships from Japan 🌍 Shipping available to 10 countries See supported countries🇭🇰 🇹🇼 🇰🇷 🇹🇭 🇬🇧 🇫🇷 🇪🇸 🇩🇪 🇨🇦 →
These are dog nose parts that can be used for needle felting as well as a variety of other craft projects.
The original model was created by yamanono, and each piece is individually cast from a silicone mold.
The back side is flat, allowing the part to be attached to your work using adhesive.
Suitable for use in needle felting, plush creations, and similar craft projects.
This shape is designed for dog breeds with lower-set noses.
It is suitable for breeds such as French Bulldogs, Pugs, and Shih Tzus, whose noses do not protrude prominently forward.
【Size & Quantity】
6 mm (10 pieces)
8 mm (8 pieces)
10 mm (6 pieces)
12 mm (5 pieces)
14 mm (4 pieces)
17 mm (3 pieces)
All Sizes Set (1 of each size / total 6 pieces)
The number of pieces per set varies depending on the size.
As each item is handmade, slight variations may occur.
Small air bubbles may be present on the back side, but this does not affect usability.
Colors may appear slightly different between the photos and the actual product.
Please note that slight color variations may also occur between production lots.
Please use a multi-purpose adhesive.Do not use instant glue, as it may cause the wool to generate heat.
How to Attach the Nose Part
1. Lightly sand the entire back surface to create fine scratches.
2. Gently place the part on the intended position and check the height, placement, and angle of the nose.
3. If needed, adjust the surrounding wool by adding fiber, felting, or trimming with scissors to refine the angle and depth of the attachment area.
4. Apply adhesive and attach the part.Apply adhesive to both the back and the area shown in pink, and attach the part so that this section is embedded into the piece.
Size Guide
Boston Terrier
| サイズ | A mm | B mm |
|---|---|---|
| 6mm | 24~28mm | 85~95mm |
| 8mm | 32~36mm | 110~125mm |
| 10mm | 39~44mm | 135~155mm |
| 12mm | 48~55mm | 170~190mm |
| 14mm | 55~62mm | 190~215mm |
| 17mm | 70~78mm | 240~270mm |
Shih Tzu
| サイズ | A mm | B mm |
|---|---|---|
| 6mm | 28~32mm | 80~95mm |
| 8mm | 38~43mm | 115~130mm |
| 10mm | 47~53mm | 140~160mm |
| 12mm | 56~63mm | 170~190mm |
| 14mm | 65~73mm | 195~220mm |
| 17mm | 80~90mm | 240~270mm |
Boxer
| サイズ | A mm | B mm |
|---|---|---|
| 6mm | 20~24mm | 80~95mm |
| 8mm | 26~30mm | 110~125mm |
| 10mm | 34~38mm | 140~160mm |
| 12mm | 40~46mm | 170~190mm |
| 14mm | 46~52mm | 190~215mm |
| 17mm | 58~66mm | 240~270mm |
Q&A
Q. After attaching the nose, the seam is noticeable. How can I blend it in?
A. For needle felting projects, using finely cut wool fibers (almost like powder) can help soften the seam.
Apply small amounts around the base of the nose and gently layer the fibers to blend them in. This helps create a more natural, seamless finish between the part and the piece.
⸻
Q. If I'm making a breed not listed in the size chart, such as a Toy Poodle, how should I choose the size?
A. If you're unsure, we recommend trying a set that includes one of each size.
During the creation process, the overall size and balance of the piece can change, so it can be difficult to determine the exact size in advance.
If you're unsure, choosing a slightly smaller size is often a good option.
By adjusting the surrounding wool and blending it in, it is generally easier to achieve a natural balance.
⸻
Q. What grit of sandpaper should I use to prepare the back of the part?
A. The purpose is simply to create a slightly rough surface for better adhesion, so there is no strict requirement.
As a general guideline, sandpaper in the range of #240 to #400 can be used.
