FeltersWax – White

FeltersWax is an original blend created by the UK manufacturer Mum’s Makery.

If you would like to compare with the original manufacturer, you can visit their website here:https://www.mumsmakery.co.uk/

When claws, noses, and other wool-crafted parts are dipped and gently kneaded with this wax, it gives them a distinctive soft sheen with a slightly moist finish.

Available in three colors: white, black, and pink.
This product is the white wax.

Made from natural ingredients and contains lanolin (a potential allergen).

<Examples of Use>
White wax: claws, noses
Black wax: claws, noses
Pink wax: tongues, noses

<How to Use>

• When dipping:
After dipping into the melted wax, wait about one minute until it cools enough to touch, then knead thoroughly.
Shape with your fingers or a spatula just before it becomes firm.
If necessary, sand lightly with around #320 sandpaper, then polish with plain copy paper to achieve a glossy finish.
If whitening or unevenness appears during kneading, use a hair dryer to help the wax absorb evenly and knead again. If fibers appear raised, dip the piece into the wax again.

• When applying directly:
Apply melted wax to the surface using a spatula or similar tool. Allow it to cool until it can be touched, then gently press the surface.
Use a hair dryer to heat and help absorption, then apply wax again. Repeat 2–3 times until there is no whitening or fuzziness.
Sand lightly with around #320 sandpaper, then polish with plain copy paper for shine.

<Precautions>
This product must be melted before use and requires proper care.
Store out of reach of children and animals.

Ingredients
• Beeswax
• Resin
• Lanolin
• Beeswax pigment

• Melting point: 62°C and above
• Do not exceed 88°C
• Flash point of beeswax: 204.4°C

Warnings
• The wax becomes hot when melted.
• Work in a well-ventilated area.
• The use of a wax melter is recommended.
• Do not leave unattended while melting.
• Use at your own risk.

※Due to the manufacturing process, very small particles may occasionally be present.  
If you melt the wax and remove them, the product can be used without any problems.

In addition, slight color variations may occur depending on the individual piece, but this does not affect the quality.